Tyre service · Dubai, Sharjah, Abu Dhabi

Alloy Rim Repair in Dubai: Kerb Rash, Bends and Slow Leaks

Alloy rims take a lot of abuse in the UAE. Narrow basement ramps, high kerbs in mall car parks, and parallel parking in older areas like Karama and Al Nahda leave scraped edges on nearly every car eventually. Low-profile tyres on 19- and 20-inch rims make it worse: there is very little sidewall between the rim edge and the kerb.

4.9 on Google
  • tabby
  • tamara
  • Card
  • Cash
Rim Repair by a TyrePuncture.ae technician
Price
AED 150–300 per rim
Time on site
Same day in most cases; 2–4 hours for cosmetic work
Available
24/7 mobile

Rim repair falls into two jobs. Cosmetic repair fixes scuffs and gouges on the outer lip and face, restoring the paint or finish so the wheel looks right again. Straightening fixes a rim that has been bent by a pothole or hard impact, which often shows up as vibration at speed or a tyre that keeps losing air. Both are done at our Al Quoz workshop.

We also tell you when a rim is not worth repairing. A crack through a spoke or near the hub is a structural failure, and no responsible repair shop should send that wheel back onto the road. For damaged tyres on a bent rim, see our page on tyre damage causes.

When you need rim repair

  • Scrapes or gouges on the outer edge of the rim from kerbs
  • A vibration in the steering wheel that balancing did not fix
  • A tyre that slowly loses air with no puncture found
  • A visible flat spot or wobble when the wheel spins
  • Paint peeling or corrosion around the rim lip

How we do it

  1. 01

    Inspect and measure

    The wheel is removed, the tyre taken off and the rim spun on a balancer or straightening machine to measure runout and look for cracks.

  2. 02

    Decide: repair or replace

    Cosmetic damage and moderate bends are repairable. Cracks in the spokes, hub area or bead seat mean replacement.

  3. 03

    Straighten

    Bent rims are gently warmed and pressed back into shape in stages, checking runout each time.

  4. 04

    Refinish

    Kerb damage is sanded, filled, primed and painted to match the original colour and finish.

  5. 05

    Refit and balance

    The tyre is remounted with a new valve, balanced, and the wheel refitted and torqued.

Kerb rash: more than cosmetic?

Most kerb rash is cosmetic, but deep gouges can matter. A scrape that removes a lot of metal from the outer lip weakens that edge, and sharp burrs can cut into the tyre sidewall over time. Gouges on the inside of the lip can also break the airtight seal with the tyre bead, causing slow leaks.

Cosmetic repair involves sanding back the damage, filling deeper marks, and refinishing to match. Painted and powder-coated rims match well. Diamond-cut rims, with a machined bright face, need a lathe to recut and are quoted separately after inspection.

Bent rims from potholes and speed bumps

A bend usually happens on the inner barrel of the rim, where you cannot see it with the wheel on the car. The giveaway is a vibration at 80–120 km/h that balancing does not fix, or a tyre that loses air at the bead. Low-profile tyres, especially on cars like the BMW 5 Series, Mercedes E-Class and Range Rover with 20-inch rims, have less cushion to protect the rim from a hard hit.

Modest bends can be straightened safely. Severe bends, or bends on the outer face with visible cracking, mean replacement. After any rim repair, it is worth checking alignment, since the same impact that bent the rim often knocks the wheel alignment out too.

Cracked rims: the honest answer

Welding a cracked cast alloy rim is sometimes offered in the market. We do not recommend it for cracks in the spokes, near the wheel nut holes or across the bead seat. Welding changes the metal's properties around the repair, and a rim that fails at highway speed is a serious accident risk. A small crack on the outer lip may be acceptable in some cases, but we will tell you straight.

If you are replacing a rim, matching the exact offset, width and centre bore matters. Our tyre damage causes guide and the article on UAE tyre rules and fines are useful background.

Rim Repair prices

ServicePrice
Cosmetic rim repair (kerb rash)AED 150–300 per rim
Straightening a bent rimAED 200–450 per rim
Remount and balance after repairIncluded

Prices in AED, including VAT. Final price confirmed before work starts.

Rim Repair: questions we get asked

How much is rim repair in Dubai?

Cosmetic repair of kerb damage costs AED 150–300 per rim. Straightening a bent rim costs AED 200–450 depending on size and severity.

Can a bent alloy rim be repaired?

Yes, in most cases, if the bend is moderate and there are no cracks. Severe bends or cracks mean replacement.

Is it safe to drive on a cracked rim?

No. A cracked rim can fail without warning, especially at speed. Have it inspected straight away.

Why does my tyre keep losing air with no puncture?

Often the rim. Corrosion or a bend at the bead seat stops the tyre sealing. Cleaning and sealing the bead, or straightening the rim, usually fixes it.

How long does rim repair take?

Cosmetic work usually takes 2–4 hours per rim. Straightening is often quicker. Most jobs are completed the same day.

Can you match my rim's original colour?

We match standard silver, gunmetal, black and most painted finishes. Diamond-cut and special finishes are quoted after seeing the wheel.

Technically reviewed by

Tyre Technician · 5 years of hands-on tyre work in the UAE — punctures, fitting, balancing, alignment and TPMS.

Send a photo. Get a price. We come to you.

WhatsApp a picture of the tyre (and the size on the sidewall if you can). We reply with the fix, the price and an arrival window.

Send your location
Call now WhatsApp