The second thing is the sidewall code. Audi-approved tyres carry AO (Audi Original), and the RS and R8 performance tyres often carry RO1 or RO2. You will find both on the cars we see most: A6 sedans on company leases, Q7s on school runs and RS Q8s that spend weekends at Yas Marina Circuit.
Audi tyre sizes and pressures
Most common factory sizes for UAE-spec cars. Trims differ — the sidewall of your current tyre and the door placard are the final word.
| Model | Tyre sizes | Factory tyre | Pressure |
|---|---|---|---|
| Audi A4 / A5 (B9) 40 TFSI S line | 245/40 R18255/35 R19 | Pirelli P Zero AO, Continental PremiumContact 6 AO | 32–38 psi |
| Audi A6 (C8) 45 TFSI | 245/45 R19255/40 R20 | Pirelli P Zero AO, Hankook Ventus S1 evo3 AO | 33–39 psi |
| Audi A8 (D5) 55 TFSI | 255/45 R19265/40 R20 | Continental ContiSportContact 5 AO, Michelin Pilot Sport 4 AO | 35–41 psi |
| Audi Q5 (FY) 45 TFSI | 235/60 R18255/45 R20 | Michelin Latitude Sport 3 AO, Bridgestone Alenza 001 AO | 33–39 psi |
| Audi Q7 (4M) 55 TFSI | 285/45 R20285/40 R21 | Pirelli Scorpion Verde AO, Continental ContiSportContact 5 SUV AO | 35–44 psi |
| Audi Q8 (4M) 55 TFSI | 285/45 R21285/40 R22 | Pirelli P Zero AO, Continental SportContact 6 AO | 36–44 psi |
| Audi RS Q8 / RS 6 | 295/40 R22295/35 R23 (RS Q8)285/30 R22 (RS 6) | Pirelli P Zero RO1/RO2, Continental SportContact 6 RO1 | 38–46 psi (see placard) |
What Audi cars need from a tyre
Unlike BMW, most Audis run the same size on all four corners, which makes rotation possible and is the cheapest way to make a set last. We suggest rotating every 8,000–10,000 km; an A6 driven mainly on Emirates Road will then wear its tyres evenly instead of scrubbing the front shoulders. AO tyres are tuned for Audi's ride comfort and low road noise. The RO1 versions on RS models use a stiffer construction and a softer, faster-wearing compound; on an RS Q8, a full set can be gone in 15,000 km if you use the launch control. Our tyre rotation service includes a tread-depth check on all four.
Run-flats, TPMS and fitting notes
Audi rarely fits run-flats in the UAE. You will usually find a space-saver spare under the boot floor of A4, A6 and Q5 models, while Q7 and Q8 rely on a sealant kit on many trims. TPMS on current Audis is mostly indirect, using the ABS wheel-speed sensors, so after fitting new tyres you must store the new pressures in the MMI menu or the warning will come on. Some RS models use direct sensors; ask us to check before you order. If a quattro car has one damaged tyre with plenty of life left on the others, a single tyre replacement is fine, provided the tread difference stays within about 2 mm.
Tyre brands we recommend for Audi
Pirelli
The default AO and RO1 partner on Q7, Q8 and the RS range, so availability of exact matches is strong in Dubai.
Continental
Germany-built AO tyres that suit Audi's quiet-cabin focus, especially the PremiumContact 6 on A4 and A6.
Michelin
Longest life on Q5 and A8 sizes; useful for high-mileage company cars.
Hankook
Ventus S1 evo3 AO is a genuine Audi OE fit and costs noticeably less than the European brands on A6 sizes.
Tyre problems we see on Audi cars
- Replacing one or two tyres on a quattro car when the others are badly worn, creating a tread-depth gap that stresses the drivetrain.
- Forgetting to save new pressures in MMI, which triggers a false TPMS warning a few days later.
- Front shoulder wear on Q7s that are never rotated.
- RS Q8 and RS 6 tyres overheating and blistering after track days; check the shoulders for chunking afterwards.
Audi tyres: FAQs
What does AO mean on an Audi tyre?
AO stands for Audi Original. It shows the tyre was developed with Audi for that car. RO1 and RO2 marks are the equivalent for RS and R8 models with higher speed and load demands.
Do I need to replace all four tyres on a quattro Audi?
Not always. If the remaining tyres are close in tread depth to the new one, usually within 2 mm, you can replace one or two. With bigger differences, replace all four or have the new tyre shaved to match.
Why is my Audi tyre pressure light on after new tyres?
Most Audis use an indirect system that needs the new pressures stored. Set the pressures cold, then go to the tyre pressure monitoring menu in MMI and select store or set.
